Case Studies

1T KBK Freestanding Workstation Crane for U.S. Manufacturer

Yuantai supplied a 1-ton KBK freestanding workstation crane system to a U.S. manufacturer, serving three assembly workstations with independent supports and electric chain hoists.

Yuantai supplied a 1-ton KBK freestanding workstation crane for a U.S.-based equipment manufacturer. Each crane was designed to serve an individual assembly workstation, where operators needed to lift and position motors, machinery components and tooling during production. The customer's existing factory lacked suitable overhead building supports for conventional ceiling-mounted crane systems. Installing a large overhead crane would also have required a different support arrangement to serve the three workstations.

To meet these needs, we offer the KBK freestanding workstation crane, which can serve three adjacent workstations. The floor-mounted support structure provides localized lifting without relying on overhead building beams, while the electric chain hoists make repetitive lifting and positioning easier for operators.

1t Electric Chain Hoist
Chain Hoist

Client Background and Material Handling Challenges

The customer is a U.S. equipment manufacturing company operating several assembly lines and individual production workstations. Motors, machinery components and tooling needed to be lifted and positioned at different work areas during assembly. Before the project, the workstations did not have dedicated lifting equipment. Workers had to rely on manual handling or mobile lifting equipment, depending on the task. These methods were not ideal for repetitive lifting at fixed production positions, especially when several workstations needed lifting support at the same time.

Through our discussions with the client, we have identified the following main constraints regarding their site:

1. No Suitable Overhead Building Supports

The production area did not have suitable structural beams or existing crane runway supports for installing a ceiling-mounted workstation crane or a conventional overhead crane. Adding overhead supports would have required additional building work. The customer therefore needed a crane structure that could support itself independently rather than transferring its loads to the factory roof or existing building beams.

2. Limited Space Around Each Workstation

The available floor area was already occupied by workbenches, production equipment and operator working zones. A lifting system needed to cover the required work area without unnecessarily occupying the surrounding floor space. The customer also wanted to avoid introducing equipment that would interfere with nearby production activities.

3. All three workstations require lifting equipment

Three adjacent workstations each required a lifting capacity of 1 ton. A shared lifting device would require operators to coordinate access between work areas. Based on these requirements, the lifting plan for this project must cover three workstations, with a lifting capacity of one metric ton.

KBK Workstation Crane Components
KBK Workstation Crane Components

Customized Solution: 1-Ton KBK Freestanding Workstation Crane

Yuantai offers a set of independent workstation overhead crane capable of covering three workstations. The freestanding arrangement was selected because the factory did not have suitable overhead building supports for a ceiling-mounted system. Instead of suspending the crane from the building structure, each unit uses its own supporting columns installed on the factory floor.

1. Independent Steel Support Columns

Each workstation crane uses a pair of vertical steel columns to support its horizontal crane structure. The columns provide an independent load-bearing arrangement, allowing the crane to operate without relying on overhead building beams or roof-mounted supports. The columns are fixed to the floor through their base plates and an engineered anchoring arrangement. The base plates, anchors and supporting floor must be designed or verified according to the crane loads and the actual site conditions.

2. Horizontal Beam and KBK Rail System

A horizontal beam spans the designated workstation area and supports the crane's rail and trolley arrangement. The trolley travels along the rail, allowing the electric chain hoist to move the suspended load within the designed working area. The modular rail-and-bridge configuration makes it possible to adapt the crane arrangement to different workstation dimensions. The required span, support locations and effective lifting coverage are determined by the project layout.

3. 1-Ton Electric Chain Hoist

The crane is equipped with a 1-metric-ton chain hoist, which can be used to move motors, mechanical components, and tools during the assembly process, effectively reducing the physical strain on operators. Each operator can perform lifting tasks from their own workstation. The lifting height is determined based on the available space at the customer's workstation.

Components of KBK Workstation Crane
Freestanding Workstation Crane Components

Why a Freestanding Workstation Crane Was Selected

When preparing a proposal for the client, we compared various options, such as cantilever cranes, overhead cranes, and underslung cranes. Ultimately, based on the client's factory conditions and production layout, we selected a freestanding workstation crane.

1. No Dependence on Overhead Crane Supports

A ceiling-mounted workstation crane requires suitable overhead building supports or a properly designed suspension structure. In this project, the available building structure did not provide suitable supports. The freestanding design addressed this limitation by using independent floor-mounted columns. It therefore avoided the need to suspend the crane from the factory roof or existing overhead beams. However, this does not mean that the installation requires no structural assessment. The floor, base plates and anchoring arrangement still need to be checked against the crane's design loads.

2. The Crane Serves Three Workstations

This KBK freestanding crane is equipped with three beams, along which chain hoists travel. Operators can use the lifting equipment within their respective production areas. This also eliminates the need for a single crane to rotate among three workstations, thereby improving operational efficiency. The arrangement is particularly useful when separate work areas perform different assembly tasks and need independent access to lifting equipment.

3. Overhead Material Handling with a Defined Floor Footprint

The horizontal beam and rail arrangement position the lifting mechanism above the workstation. The crane's main structural footprint is concentrated around its supporting columns, leaving the central working area available for assembly equipment and other production activities.

4. A Modular Arrangement for Workstation Layouts

Modular workstation crane systems can be configured around specific production areas rather than requiring every factory to use the same crane dimensions. For similar projects, the span, lifting height, rail arrangement and supporting structure can be selected according to the workstation layout and lifting requirements. Any future extension or relocation must still be reviewed against the new layout, structural loads and floor conditions.

Structural Components for KBK Workstation Cranes
Structural Components for KBK Workstation Cranes

Project Results and Application Benefits

This crane provides a dedicated lifting system for the customer's assembly workstation. It meets the customer's needs for equipment installation and material handling.

Original Requirement Supplied Solution Practical Benefit
No suitable overhead crane supports Independent floor-mounted support columns Provided a self-supporting crane arrangement
Three workstations needed lifting equipment A lifting system covering three workstations Gave each workstation dedicated lifting access
Repetitive handling of motors and machinery components Electric chain hoists Reduced dependence on manual lifting
Limited working space Overhead rail-and-beam arrangement Kept the main area below the crane available for production activities
Different workstation dimensions Project-specific crane layout Allowed the equipment arrangement to match the required work areas

This arrangement addresses the need for dedicated lifting equipment where suitable overhead building supports are unavailable.

Related Workstation Crane Solutions from Yuantai

Different factories have different building structures and workstation layouts. The appropriate workstation crane depends on the required lifting capacity, span, lifting height, operating frequency and available installation supports. Yuantai provides both freestanding and ceiling-mounted workstation crane solutions.

Ceiling-Mounted Workstation Cranes Freestanding Workstation Cranes
Ceiling-Mounted Workstation CranesAsk for Price Freestanding Workstation CranesAsk for Price
  • Lifting Capacity: 0.5-10t
  • Lifting Height: 6-30m
  • Span: 3–15m
  • Working Temperature: -20-+40 ℃
  • Lifting Capacity: 0.5-3 ton
  • Lifting Height: 1-10 m
  • Span: 1-10 m
  • Working Temperature: -20-40 ℃

Need a Customized Workstation Crane for Your Factory?

Whether you need a freestanding or ceiling-mounted workstation crane, Yuantai can help develop a lifting solution based on your production layout and operating requirements.

freestanding workstation crane

To request a quotation, please provide the following information:

  • Required lifting capacity.
  • Number of workstations or crane units.
  • Required span and lifting height.
  • Workstation dimensions and layout.
  • Available floor or overhead support conditions.
  • Power supply, including voltage, phase and frequency.

Our engineering team can use these details to evaluate the crane configuration and prepare a customized lifting proposal. Contact Yuantai to discuss your workstation crane requirements.

Frequently Asked Questions

1. Can a 1-ton freestanding workstation crane be installed without overhead building supports?

Yes. A freestanding workstation crane is supported by its own floor-mounted columns rather than being suspended from overhead building beams. This makes it an option for factories that do not have suitable overhead supports for a ceiling-mounted workstation crane. However, the concrete floor, base plates and anchoring arrangement must still be checked to ensure that they can withstand the loads and operating forces transferred through the columns.

2. What is the difference between a freestanding and a ceiling-mounted workstation crane?

The main difference is how the crane is supported. A freestanding workstation crane uses independent columns installed on the floor. It is suitable for work areas where suitable overhead building supports are unavailable. A ceiling-mounted workstation crane is suspended from the building structure or a properly designed overhead support system. It can keep the floor area below the crane free of independent support columns.

3. What span and lifting height are available for a 1-ton workstation crane?

Yuantai's standard freestanding workstation crane range covers spans of 1–10 m and lifting heights of 1–10 m, with lifting capacities from 0.5–3 tons. The actual span and lifting height for a 1-ton crane depend on the workstation dimensions, required hook position, supporting structure and available installation space.

4. What type of hoist is used on a 1-ton KBK workstation crane?

Workstation cranes are typically equipped with chain hoists. They provide powered lifting capabilities to meet the frequent material handling needs of assembly stations. If you require a wire rope hoist, we can also provide one. You can choose between a manual or electric trolley depending on your desired method of movement.

5. Can a freestanding workstation crane be relocated or expanded?

Modular crane components can make disassembly, reconfiguration and future layout changes more practical. However, relocation is not simply a matter of unbolting the crane and installing it anywhere else. The new location must be checked for adequate floor support, anchoring, clearances and structural suitability.

Contact to Get Solution & Price

Respond quickly to customer needs, questions and create value.

Yuantai Crane is a professional industrial crane manufacturer providing customized lifting solutions, including overhead cranes, gantry cranes and other industrial lifting equipment for factories, warehouses, steel plants, ports and industrial facilities worldwide.

Email: [email protected]