Yuantai offers single girder overhead cranes for general material handling, workshops with limited headroom, suspended runway arrangements, metallurgical applications and classified hazardous areas. The suitable design depends on your rated lifting capacity, crane span, required hook height, duty cycle and building structure.

Types of Yuantai Single Girder Overhead Cranes

HD Single Girder Overhead Cranes

HD single girder overhead cranes are designed according to European FEM/DIN standards. It features a compact structure and low headroom design, which helps to achieve a higher lifting height in a limited space. These cranes usually come with advanced electric wire rope hoists and frequency control, so lifting and traveling movements are smooth and precise. Because the crane is lighter, it puts less load on your building structure and reduces energy use over time. This type works well in medium to heavy-duty environments such as machinery manufacturing, automotive plants, and metal workshops where you need reliable and consistent lifting performance.

10 ton HD Single Girder Overhead Crane

Specification and Design Drawing of HD Single Girder Overhead Crane

Types HD Single Girder Overhead Cranes
Load capacity 1-20 ton
Span 6-28.5 m
Lifting height 1-50 m
Work duty A3 - A5
Drawings for a 5t HD single girder overhead crane

LD Single Girder Overhead Cranes

LD single girder overhead cranes are the most common and cost-effective choice for general lifting tasks. They use a traditional box girder design and are typically equipped with CD or MD wire rope hoists. This type is easy to install, operate, and maintain, which makes it a practical option for many factories. If your lifting work is regular but not extremely heavy, the LD crane gives you a good balance between cost and performance. It is widely used in warehouses, workshops, and assembly lines where stable and simple lifting solutions are needed.

ld Single Girder Overhead Crane

Specification and Drawing of LD Overhead Cranes

Types LD Single Girder Overhead Cranes
Load capacity 1-20 ton
Span 7.5-31.5m
Lifting height 1-50 m
Work duty A3,A4
LD Drawing of Single Girder Overhead Crane

LX Underslung Overhead Crane

The LX underslung overhead crane is designed to run under the roof structure instead of on top of runway beams. This design helps you save floor space and make better use of your existing building. It works well in facilities with limited headroom or where installing columns is not practical. The crane moves smoothly along suspended tracks and is suitable for light to medium lifting tasks. It is often used in workshops, production lines, and maintenance areas where flexibility and space efficiency are important.

yuantai-3t-underslung-cranes

Specifications

Types LX Suspension Single Girder Overhead Cranes
Load capacity 0.5-10 ton
Span 3-15 m
Lifting height 1-10 m
Work duty A3,A4

Drawings for LX Single-Girder Bridge Crane

LX Underslung Overhead Crane

LDP Low Headroom Single Girder Overhead Cranes

The LDP low headroom single girder overhead crane is designed for workshops with limited vertical space. Unlike standard designs, the hoist is placed beside the girder instead of underneath it. This increases the lifting height and allows you to use more of the available space. The crane keeps the same simple structure as the LD type but improves efficiency in low buildings. It is a smart choice if you want better lifting performance without changing your workshop structure.

LDP Single Girder Overhead Crane

Specification and Drawing for LDP Overhead Crane

Types LDP Low Headroom Single Girder Overhead Cranes
Load capacity 1-20 ton
Span 6-28.5m
Lifting height 1-50 m
Work duty A3,A4
Drawings for LDP Single Girder Overhead Crane

LB Single Girder Explosion-Proof Overhead Cranes

The LB explosion-proof overhead crane is specially designed for hazardous environments where flammable gases, dust, or vapors may be present. All key components, including motors, electrical systems, and controls, are designed to prevent sparks and reduce the risk of ignition. This ensures safe operation in industries such as chemical plants, oil and gas facilities, and paint workshops. If your working environment has strict safety requirements, this crane provides a reliable and compliant lifting solution.

LB Explosion-proof Overhead Crane

Specifications

Types LB Single Girder Explosion-Proof Overhead Cranes
Load capacity 1-20 ton
Span 7.5-28.5m
Lifting height 6-18m
Work duty A3, A4

LDY Single Girder Overhead Cranes

LDY single girder metallurgical overhead cranes are specially designed for handling molten metal and high-temperature materials in foundries, steel mills, and casting workshops. They feature a heat-insulated main girder underside and a metallurgical electric wire rope hoist equipped with multiple braking devices and overload protection. High-temperature-resistant cables and Class H motor insulation help the crane operate in demanding metallurgical environments. These cranes are designed to support safe and reliable lifting operations where heat radiation and strict safety requirements make standard overhead cranes unsuitable. Yuantai offers customized lifting heights and electrical configurations to meet different workshop layouts and operating conditions.

ldy Single Girder Metallurgical Overhead Crane

Specification and Drawing of LDY Metallurgical Overhead Crane

Types LDY Metallurgical Overhead Crane
Load capacity 1–10 ton
Span 18–36 m
Lifting height Customized
Work duty A3, A4
LDY Metallurgical Overhead Crane Drawing

Comparison of Single Girder Overhead Crane Models

Model

Rated Lifting Capacity

Span

Lifting Height

Primary Applications

LD Overhead Crane

1–20 t

7.5–31.5 m

1–50 m

Material Handling in Standard Factories and Warehouses

HD Overhead Crane

1–20 t

6–28.5 m

1–50 m

Applications requiring a compact configuration

LX Underslung Overhead Crane

0.5–10 t

3–15 m

1–10 m

Suspended runway configuration

LDP Low Headroom Overhead Crane

1–20 t

6–28.5 m

1–50 m

Factories with Limited Vertical Clearance

LB Explosion-Proof Overhead Crane

1–20 t

7.5–28.5 m

6–18 m

Confirmed for use in operating conditions within the corresponding hazardous areas

LDY Metallurgical Overhead Crane

1–10 t

18–36 m

Customized

Verified for use under the specific operating conditions of the corresponding metallurgical operations

Compare Single Girder Overhead Crane Types

Crane Type

Main Design Feature

Best Suited For

Building & Installation Requirements

Key Selection Considerations

LD Single Girder Overhead Crane

Conventional single-girder overhead crane configuration

General material handling in factories, workshops and warehouses

Requires a suitable overhead runway system and adequate installation space

Rated capacity, span, lifting height, duty class and available headroom

HD Single Girder Overhead Crane

Compact, European-style single-girder configuration, subject to the offered design

Workshops seeking a compact crane arrangement and suitable lifting performance

Requires a compatible runway structure and sufficient space for the crane and hoist

Hoist design, hook approach, overall dimensions, travel speeds and control options

Single Girder Underslung Overhead Crane

Bridge crane suspended from the bottom flanges of overhead runway beams

Workshops where a suspended runway system is more suitable than a conventional top-running arrangement

Roof beams or supporting structures must safely carry the crane, lifted load and operating forces

Building structure, runway arrangement, span, capacity and available installation clearance

LDP Single Girder Low Headroom Bridge Crane

Low-headroom design intended to make better use of limited vertical space

Buildings where the available lifting height is restricted

Requires sufficient clearance for the bridge, hoist, trolley and hook movement

Available headroom, required hook height, hook approach and hoist configuration

LDY Single Girder Metallurgical Overhead Crane

Configuration intended for specified metallurgical service conditions

Metallurgical production areas with demanding operating conditions

Must match the plant layout, ambient conditions and applicable safety requirements

Material or load handled, temperature, duty cycle, braking requirements and required safety provisions

Single Girder Explosion-Proof Overhead Crane

Explosion-protected configuration for a classified hazardous area

Industrial facilities with potentially explosive gas or combustible dust atmospheres

Crane components and electrical equipment must meet the area's hazardous-location requirements

Hazardous-area classification, gas or dust group, temperature class, protection level and required certification

Note: Actual capacity, span, lifting height, duty class, lifting mechanism and available options depend on the specific Yuantai model and project configuration. Model codes can vary between manufacturers, so the final selection should be based on Yuantai's technical specifications and drawings.

Which Single Girder Overhead Crane Should You Choose?

Your Requirement

Type to Consider

Why

General lifting in a factory or warehouse

LD single girder overhead crane

A conventional solution for routine material handling

A compact, European-style crane arrangement

HD single girder overhead crane

Worth considering when the offered design's dimensions and hoist arrangement suit the building

A suspended runway arrangement

LX underslung overhead crane

The bridge runs on runway beams supported from above, subject to structural suitability

More lifting height in a building with limited headroom

LDP low headroom bridge crane

The hoist arrangement is designed to address restricted vertical clearance

A crane for specified metallurgical working conditions

LDY metallurgical overhead crane

The configuration must match the actual process, load and operating environment

Lifting equipment for a classified explosive atmosphere

Explosion-proof overhead crane

Protection requirements must match the hazardous-area classification

Low headroom, metallurgical service and explosion protection address different requirements. They should not be treated as interchangeable features. For example, choosing a low-headroom crane does not automatically make it suitable for a metallurgical environment or a hazardous area.

Main Components

A single-beam bridge crane consists of several structural and mechanical parts that work together to move loads efficiently. Among these, the main beam, end beam, and hoist are core components.

end-beam

The main beam spans across the working area and serves as the primary structural element supporting the hoist and trolley. It is usually constructed from either rolled I-beams or welded box sections, depending on load requirements and design specifications. The material selection and structural profile ensure the beam has adequate stiffness to resist bending and deflection during operation. Proper beam alignment and reinforcement are critical to maintaining load stability and consistent hoist travel.

The end beam is positioned at both ends of the main beam and plays a structural and functional role. It connects the main beam to the traveling mechanism and supports the wheels that engage with the runway rails. This configuration enables the crane to move horizontally along the working area. The end beam is designed to maintain alignment and load balance during travel. It also accommodates the drive motors and gearboxes that power the crane's movement across the span.

the-electric-hoist
the-main-beam

The hoist is the core lifting component installed on the main beam. It consists of a motor, drum, wire rope or chain, and a hook. The hoist travels horizontally along the main beam while lifting or lowering the load vertically. The motor provides the driving force, and the drum or chain mechanism controls the movement of the lifting medium. Its design allows for precise load handling and is selected based on lifting capacity, speed requirements, and the nature of the load.

Specifications Single Girder Bridge Cranes

Span S (m) 7.5 10.5 13.5 16.5 19.5 22.5 25.5
Working duty   A5
Lifting height m 6, 9, 12
Lifting speed m/min 0.8/5
Trolley weight kg 640
Total weight kg 2696 3200 4091 5307 6466 7694 9309
Max Wheel Load KN 51.85 54.44 57.7 60.83 64 67.26 71.36
Track   P30
Main Dimension mm 7.5 10.5 13.5 16.5 19.5 22.5 25.5
Rail top to main top H 908 908 1008 1208 1308 1358 1482
Rail top to hook center h 465 465 465 365 365 365 345
Hook left limitation C1 675 675 675 675 675 675 695
Hook right limitation C2 1020
Track center to end beam lateral A 100
Wheel base W 2000 2000 2000 2500 3000 3000 3500
Crane width B 2674 2674 2674 3174 3674 3674 4174

Customization Options

Yuantai offers customization options to adapt the crane to your job. We will customize each crane for you according to your site space, load, usage environment and other factors.

1. Lifting Capacity

We size cranes to match the loads you lift every day. For our 1–20 ton single girder models, we recommend specifying the heaviest regular load and the heaviest occasional load. We then build in a safety margin so the crane isn't pushed to its limits. This protects equipment and people, and it helps you avoid premature wear.

2. Span and Lifting Height

Designed to fit your facility's dimensions. We can customize the span to align with your building's width and lifting height to accommodate vertical clearance requirements, ensuring the crane operates efficiently without interfering with existing structures or equipment.

3. Control Systems

Choice between pendant, remote, or cabin controls. The handheld control is easy to operate and very suitable for short distance work. Wireless remote control offers more flexible control while providing you with a safer way to do so. If you are using the remote control, you can operate it while watching the load move. The range of remote control is usually within a hundred meters. Cabin control gives a full workspace view and is best for long shifts or precise positioning. All options include emergency stop and safety interlocks.

4. Color and Finish

We offer finishes that protect and promote your brand. Industrial-grade coatings such as powder coat and epoxy primers resist corrosion, moisture, and UV. For coastal sites or chemical exposure, we specify thicker, corrosion-resistant systems. You can also choose your company colors for a professional look.

5. Electrical System

You can choose electrical packages that match your plant's standards. Options include starters, contactors, drives, and protections sized to your power supply. We include overload protection, phase-loss detection, and smooth-start features when needed. All systems are selected for reliability and easy integration with your controls.

6. Dual Hoist Lifting

Dual hoists let you lift long or awkward loads more safely. The hoists can run independently or together for tandem lifts. This improves balance and reduces load swing on long parts. We size and synchronize the hoists, and recommend appropriate rigging and operator training for tandem operations.

7. Weighing System

Optional weight indicator to accurately detect the weight of the lifting load; optional display for easy viewing of the loaded weight. This feature enhances operational safety by helping prevent overloads and supports process control where load tracking is essential.

Safety Configuration

It is equipped with a variety of protection mechanisms such as linkage protection, overload protection, zero protection, and limit protection to ensure the reliable and secure operation of the crane. These features work together to detect anomalies and automatically intervene to prevent accidents or equipment damage.

1. Reel Design

The reel is made of high-strength steel and engineered for precision, ensuring minimal deflection of the wire rope during operation. This design reduces wear and tear, extending the lifespan of both the wire rope and reel system, which contributes to long-term operational safety.

2. Motor Protection System

The motor of the hoisting mechanism is fitted with a dedicated air-cooling system, maintaining optimal operating temperatures even under continuous use. In addition, the motor features an IP54 protection rating, preventing the ingress of dust and moisture and thereby enhancing the durability of the electrical components.

3. Independent Braking System

Equipped with a robust and independent braking system that features automatic wear compensation, the crane ensures consistent braking performance over time. For operations requiring added redundancy, a dual braking system is available upon special request to meet high-risk or heavy-duty safety standards.

4. Advanced PLC Monitoring

The crane integrates an advanced PLC (Programmable Logic Controller) for automatic performance detection, supported by a user-friendly human-machine interface (HMI). This system can measure, calculate, and monitor the equipment's performance, safety status, and operational conditions in real time, offering operators actionable insights to ensure the safe and reliable transportation of goods.

Need Help Choosing the Right Single Girder Overhead Crane?

Not sure whether an LD, HD, LX, LDP, LDY or explosion-proof overhead crane is suitable for your application? Share your lifting requirements and workshop conditions with Yuantai Crane.

Our team can review your rated capacity, span, lifting height, available headroom, duty cycle and working environment to help determine a suitable crane configuration.

To get a more accurate recommendation, please provide:

  • Rated lifting capacity
  • Required span and lifting height
  • Available building headroom
  • Daily operating hours and lifting frequency
  • Working environment and any special safety requirements

Contact Yuantai Crane to discuss your project and request a tailored quotation.

Manufacturing and Quality Inspection of Single Girder Overhead Cranes

Yuantai's single-girder overhead cranes involve several manufacturing stages, from main girder fabrication and mechanical assembly to electrical installation and pre-dispatch testing. Specific manufacturing and inspection requirements depend on the crane design and approved project specifications.

1. Crane Manufacturing and Main Girder Fabrication

The main girder is a primary structural component of the crane. Its dimensions and configuration are determined by the crane design and project requirements. Production photos show the actual manufacturing environment and main girder fabrication process.

bridge crane fabrication
Single girder bridge crane main girder fabrication

2. Mechanical Assembly

The main girder is assembled with the end carriages, hoisting unit and travelling components according to the selected crane configuration. Assembly checks help verify the arrangement of the relevant components against the applicable drawings and technical requirements.

Single girder bridge crane main beam
Single girder bridge crane assembly

3. Electrical Cabinet and Component Assembly

The electrical cabinet, control components and related electrical equipment are configured for the crane's specified power supply and control requirements. The actual components and control functions depend on the selected configuration.

Single girder bridge crane electrical cabinet
bridge crane electrical cabinet

4. Functional Testing and Pre-Dispatch Inspection

After assembly, applicable operating functions are checked according to the approved technical requirements and agreed inspection scope. These checks may cover the relevant lifting, travelling, control and safety functions. Any required load tests, acceptance criteria and inspection records should be confirmed for the specific order.

Load Test for Single Girder Overhead Crane

Before ordering, customers can confirm the inspection scope and which applicable test records or quality documents will be supplied with their crane.

Function

1. Multi-speed Adjustment Function

The crane is equipped with both low-speed and high-speed modes. Operators can switch between speeds depending on the nature of the load and the precision required. Low-speed mode is suitable for delicate positioning, while high-speed mode supports routine transport tasks to improve overall efficiency.

2. Electric Anti-Sway

The electric anti-sway system helps reduce load swing during motion. It does so by actively adjusting the crane's movement based on real-time feedback. This feature supports accurate load placement and reduces the need for manual correction, especially when working with tall or suspended items.

3. Precise Positioning

The crane slows down automatically as the load nears the target point. This reduces momentum and allows operators to position the load more accurately. The feature helps prevent overshooting and limits the risk of misalignment, which is essential for assembly or storage operations that require close tolerances.

Single Girder Overhead Crane Projects

Explore how Yuantai adapts single-girder overhead cranes to different lifting requirements, building conditions and operating environments.

10-Ton HD Overhead Crane – Uzbekistan

Challenge: Frequent heavy-load handling in a logistics warehouse. Solution: A 10-ton HD crane with an NR wire rope hoist, inverter control and multiple safety devices.

View Project Details

16-Ton LD Overhead Crane – Pakistan

Challenge: Repeated handling of long steel beams and heavy construction components. Solution: A 16-ton LD crane with a two-speed hoist, inverter drives and anti-collision sensors.

View Project Details

5-Ton HD Overhead Crane – Steel Structure Workshop

Challenge: Limited installation access and restricted workshop space. Solution: A 5-ton HD crane with a low-headroom hoist arrangement and modular girder sections.

View Project Details

3-Ton LX Under-Running Crane – Russia

Challenge: Lifting machinery components while keeping floor space clear of supporting columns. Solution: A 3-ton LX suspended crane with wireless remote control and inverter-driven movements.

View Project Details

Planning a similar project? Share your lifting requirements with Yuantai.

After-Sales Support and Technical Assistance

Yuantai provides technical assistance and after-sales support for single girder overhead cranes.

  • Installation and commissioning: We can arrange engineers to provide on-site installation and commissioning support according to project requirements.
  • Technical assistance: If you encounter operating issues, contact us through our website, WhatsApp, Facebook, or email. Please provide your email address, crane type, and order details to help us identify your equipment and respond more efficiently.
  • Spare parts: We supply crane components, including hoists, wheels, wire ropes, lifting attachments, conductor bar systems, hooks, and rails.
  • Inspection arrangements: If you require an on-site inspection, a factory visit, or third-party inspection, please contact us in advance so we can arrange reception and coordinate the necessary details.

Contact Yuantai Crane for technical support, spare parts, or inspection arrangements.