Case Studies

2T LD Single Girder Overhead Crane for Cyprus Workshop

Explore Yuantai’s 2-ton LD overhead crane project for a Cyprus metalworking workshop, featuring a CD wire rope hoist and pendant control. Request a quote.

Project Overview

This project demonstrates how a light-duty single girder overhead crane can replace slow, manual or forklift-dependent material handling in a crowded workshop. The crane provides dedicated overhead lifting coverage without occupying additional floor space, making it suitable for small and medium-sized industrial workshops with limited headroom.

Project Location Cyprus
Industry Metalworking and machinery manufacturing
Crane Type LD single girder overhead crane
Rated Lifting Capacity 2 tons / 2,000 kg
Hoist Type CD electric wire rope hoist, single-speed
Control Method Pendant control
Typical Span About 6 m, customized to the workshop layout (final value per approved drawing)
Lifting Height About 4 m under hook, based on available building clearance (final value per approved drawing)
Duty Class ISO/CMAA A3 light-duty class, suitable for intermittent workshop lifting
Main Application Workshop material handling for steel plates, machine parts and components up to 2 tons
Key project result: The customer replaced manual chain hoisting and forklift coordination with a dedicated overhead lifting point. Final performance data should be verified against the project acceptance record.
2T LD End Beam
LD End Beam
LD Main Girder

Customer Background and Lifting Requirements

The customer operates a small-scale metalworking and machinery workshop in Cyprus. The shop fabricates and assembles metal structures, engine parts and industrial equipment components. Typical loads include steel plates, H-beams, pipes, lathe spindles and machinery parts up to 2 tons.

Before the crane was installed, operators used overhead chain hoists, portable gantry cranes or forklifts. In a compact workshop lined with machines, these methods caused waiting time, required multiple workers and created safety concerns. The customer needed a dedicated overhead lifting system that could cover the working bay without blocking aisles or requiring major structural changes.

Customer's Lifting Requirements

  • Limited floor space: Machinery and workstations left little room for forklift movement or large floor-mounted lifting equipment.
  • Low headroom: The available building height was about 4.5–5 m, so the crane and hoist needed a compact configuration.
  • Frequent medium lifts: Daily lifting of 1–2 ton loads at multiple positions required a faster and more flexible handling method.
  • Safety concerns: Manual chain blocks and forklifts in tight aisles increased handling risk and required extra coordination.
  • Budget limits: As a small enterprise, the customer needed a cost-effective crane with straightforward maintenance.

Customized Lifting Solution: 2T LD Single Girder Overhead Crane

After reviewing the workshop layout and lifting requirements, Yuantai recommended a 2-ton LD single girder overhead crane equipped with a CD-type electric wire rope hoist. The crane consists of a single main girder, end carriages, a traveling hoist trolley and a pendant control system. The bridge travels along runway rails, while the hoist trolley moves along the main girder to position loads within the working area.

Why an LD Single Girder Crane Was Recommended

Single-Girder Structure

One main bridge girder supports the traveling electric hoist, providing a practical and economical arrangement for the required 2-ton lifting capacity.

Floor-Space Efficiency

The crane performs lifting and horizontal movement above the working area, leaving the workshop floor available for machinery, production and material storage.

Compact CD Hoist

The CD single-speed wire rope hoist offers a compact low-headroom design, simple control and dependable braking for routine workshop lifting.

Straightforward Operation

Pendant control gives operators direct control over lifting, lowering, trolley travel and crane travel.

The final crane configuration should always be confirmed according to actual load characteristics, lifting frequency, span, lifting height, power supply and building structure.

Steel Frames
Steel Frames for Industrial Buildings

2T LD Single Girder Overhead Crane Specifications

The following table summarizes the confirmed project configuration and key technical parameters.

Parameter Specification
Crane Type LD single girder overhead crane
Rated Lifting Capacity 2.0 tons / 2,000 kg
Span 6.0 m
Lifting Height 4.0 m under hook
Duty Class ISO/CMAA A3 light-duty class
Main Girder Welded steel I-beam bridge with end carriages
Hoist Model CD single-speed electric wire rope hoist
Control Method Pendant control with up/down, forward/reverse and emergency stop
Safety Devices Overload limiter, upper/lower limit switches, mechanical end stops, emergency stop
Testing Proof-load test at 125% of rated capacity performed according to applicable project requirements
Applicable Standards Design and testing reference: ISO/FEM and relevant ASME/OSHA requirements

Crane Structure and Operating Mechanisms

  1. Main girder: The primary bridge structure supports the hoist trolley and suspended load. Its dimensions and structural design are determined according to crane capacity, span and applicable design requirements.
  2. End carriages: Installed at both ends of the main girder, they support the crane wheels and connect the bridge to the runway traveling mechanism.
  3. CD electric wire rope hoist: Mounted on the main girder through a traveling trolley, it performs vertical lifting and lowering.
  4. Crane and trolley travel mechanisms: The trolley moves the hoist horizontally along the girder, while the crane travel mechanism moves the entire bridge along the runway rails.
  5. Pendant control: Allows the operator to control lifting, lowering and traveling movements from a safe operating position.

Manufacturing, Quality Inspection and Delivery to Cyprus

Supplying an overhead crane involves more than selecting the equipment model. Manufacturing, component inspection, testing, packaging and overseas delivery preparation are also important parts of the project.

Manufacturing and Quality Inspection

  • Main girder fabrication: The main girder is manufactured according to the required crane span and structural design, and checked against approved technical drawings.
  • End carriage assembly: End carriages and traveling components are assembled to match the crane structure and runway requirements.
  • Hoist and electrical system installation: The CD wire rope hoist, trolley and electrical components are assembled according to the selected configuration.
  • Surface treatment and painting: Steel components receive the specified surface preparation and coating treatment.
  • Functional inspection: Hoisting operation, trolley movement, crane travel, braking and control functions are checked according to the agreed inspection scope.
  • Proof-load testing: A 125% rated-capacity proof-load test is performed according to applicable project and safety requirements before delivery or on site, as agreed.

Packaging and Overseas Delivery

For an overseas project such as this one in Cyprus, crane components are properly protected during handling and shipping. The main structure, hoist and electrical components may be packed separately according to their dimensions and shipping requirements. Clear component identification and appropriate packaging help facilitate unloading and subsequent assembly at the destination.

Installation and Commissioning Support

Yuantai can provide relevant technical documentation to support installation and commissioning according to the agreed project scope. For existing workshops, runway support structure, available installation space and power supply should be evaluated before finalizing the crane design.

How a 2T LD Overhead Crane Supports Workshop Material Handling

The 2-ton LD single girder overhead crane provides a dedicated overhead lifting system for the customer's workshop. Its practical benefits include:

Overhead Material Handling

The crane moves loads above the working area, helping keep the workshop floor available for production equipment and other activities.

Suitable Lifting Capacity

The 2-ton rated capacity meets the customer's specified lifting requirement for steel plates, machine parts and components.

Flexible Load Positioning

Combined crane travel and trolley travel allow loads to be moved to different positions within the designed working area.

Improved Safety and Efficiency

A dedicated overhead lifting point reduces manual chain hoisting and forklift coordination in tight workshop aisles.

Practical Equipment Configuration

The LD bridge structure and CD wire rope hoist provide a conventional, cost-effective solution for general workshop lifting applications.

Simple Maintenance

The CD single-speed hoist has a straightforward design with fewer control complexities than dual-speed systems, supporting routine inspection and maintenance.

Project outcome: The crane has been used reliably in daily operation. The customer reported easier handling of heavy components and appreciated the straightforward maintenance requirements.

Explore More Single Girder Overhead Crane Solutions

LD Single Girder Overhead Cranes HD Single Girder Overhead Cranes LDP Single Girder Low Headroom Bridge Crane
LD Single Girder Overhead Cranes Ask for Price HD Single Girder Overhead Cranes Ask for Price LDP Single Girder Low Headroom Bridge Crane Ask for Price

The LD single girder overhead crane is the product configuration featured in this Cyprus project. It is suitable for general industrial lifting applications where a single-girder structure meets the required capacity, span and duty conditions.

The HD single girder overhead crane provides another single-girder configuration for customers comparing different crane designs. Its suitability should be evaluated according to the required lifting capacity, span, lifting height and working conditions.

For workshops where available headroom is limited, an LDP low headroom bridge crane may be worth considering. Its different hoist arrangement is designed to address lifting-height and clearance requirements that cannot always be met by a conventional LD configuration.

The appropriate crane model depends on the complete project conditions rather than lif Yuantai can evaluate your building layout and operating requirements to recommend a suitable configuration.

Why Choose Yuantai for a 2-Ton Overhead Crane?

Selecting an overhead crane manufacturer involves evaluating more than the product's rated capacity and price. Buyers also need to consider engineering capability, manufacturing quality, equipment configuration and support throughout the project.

Yuantai focuses on customized industrial crane manufacturing and provides lifting equipment for workshops, warehouses and various industrial applications.

  • Customized crane design: Crane configurations can be developed according to the required lifting capacity, span, lifting height and building conditions.
  • Equipment manufacturing: Main structural components, hoisting equipment and electrical systems are coordinated according to approved project specifications.
  • Inspection and testing: Equipment inspection and testing can be arranged according to applicable project requirements and the agreed scope.
  • Overseas project support: Technical documentation and relevant support can be provided according to the customer's delivery and service requirements.
  • Practical case experience: This Cyprus project demonstrates experience in supplying compact overhead crane solutions for small and medium-sized workshops.

FAQs About 2-Ton LD Single Girder Overhead Cranes

What is an LD single girder overhead crane?

An LD single girder overhead crane is an electric overhead bridge crane that uses one main girder to support a traveling electric hoist. The hoist moves along the girder, while the crane travels along runway rails to cover the working area. This configuration is commonly used in general industrial workshops, warehouses and manufacturing facilities where the lifting capacity and duty requirements are suitable for a single-girder crane.

Is a 2-ton single girder overhead crane suitable for a small workshop?

A 2-ton single girder overhead crane can be a suitable lifting solution for a small workshop that regularly handles loads within its rated capacity. However, selection should not be based on lifting capacity alone. The crane span, lifting height, building structure, headroom, lifting frequency and working duty must also be considered.

What is the difference between LD and HD single girder overhead cranes?

LD and HD are different single-girder overhead crane configurations. Their structural design, dimensions, hoist arrangements and applicable operating conditions may differ. The appropriate model depends on lifting capacity, span, lifting height, available headroom, working duty and building structure.

Why use a CD single-speed wire rope hoist?

A CD hoist has one fixed lifting speed and a fast braking mechanism. This makes it simpler and often more cost-effective than a two-speed hoist when loads are lifted at a uniform rate. Maintenance is straightforward because the control and drive arrangement is relatively simple.

What safety testing was performed on this crane?

A proof-load test at 125% of rated capacity was performed according to applicable project and safety requirements. Limit switches, overload protection and emergency stop functions were also checked. Final inspection and test records should be reviewed against the agreed project documentation.

What information is needed to get a quotation for a 2-ton overhead crane?

To prepare a suitable quotation for a 2-ton overhead crane, the manufacturer generally needs:

LD Overhead Crane Parameter
  • Required lifting capacity.
  • Crane span.
  • Lifting height.
  • Power supply voltage and frequency.
  • Working environment, such as indoor or outdoor operation.
  • Required control method.

For an existing workshop, building drawings, runway dimensions or photographs of the installation area are also helpful.

Can Yuantai customize a 2-ton overhead crane for an existing workshop?

Yes. Yuantai can design and manufacture overhead cranes according to project requirements. For an existing workshop, customers should provide available building dimensions, runway arrangement, required lifting height and power supply information. The engineering team can then evaluate the suitable crane configuration and identify relevant building or installation requirements before finalizing the design.

Can a 2-ton LD overhead crane be used outdoors?

An LD overhead crane can be configured for certain outdoor or semi-outdoor applications, provided the equipment is designed for the actual environmental conditions. Outdoor projects may require additional protection for electrical components, motors, brakes and steel structures. Weatherproof covers, suitable paint systems and appropriate protection ratings should be considered according to site conditions.

What maintenance is required for a 2-ton LD overhead crane?

Routine maintenance generally includes inspecting the wire rope, checking brake function, inspecting bolts, limit switches and controls, and replacing wear parts according to usage. A yearly safety inspection is recommended, and the manufacturer's maintenance manual should be followed.

© 2026 Yuantai Crane. This case study is provided for general product and project reference. Final crane specifications, testing scope, standards and delivery terms are subject to the approved technical agreement and project documentation.

Contact to Get Solution & Price

Respond quickly to customer needs, questions and create value.

Yuantai Crane is a professional industrial crane manufacturer providing customized lifting solutions, including overhead cranes, gantry cranes and other industrial lifting equipment for factories, warehouses, steel plants, ports and industrial facilities worldwide.

Email: [email protected]

WhatsApp: +86 15003854290